Selamat Hari Raya Idul Fitri 1439H

Taqoballahu Minna Waminkum

Pelayanan toko offline dan online akan libur pada 13 s/d 24 Juni 2018

Terima Kasih

Pelanggan Yang Terhormat, seluruh aktivitas CENTRAL ELECTRONICS di pertokoan JAYA PLAZA dan di Head Office, Ruko Jl. Terusan Jakarta no. 30G Bandung sudah kembali seperti biasa.

Dear Customer, CENTRAL ELECTRONICS menyediakan layanan delivery order via kurir berikut:


RepRap A4988 Stepper Driver Module

IDR 45.500
terbatas


 add to cart
RepRap A4988 Stepper Driver Module
Description:
A4988 is a complete microstepping motor driver with built-in translator for easy operation. This product is available in full, half, 1/4, 1/8 and 1/16 step modes operate bipolar stepper motors, output drive capacity of up to 35 V and ± 2 A. A4988 includes a fixed off-time current regulator, the regulator in slow or mixed decay modes. A4988 converter is the key to the easy implementation. As long as the "step" input inputting one pulse drives the motor one microstep. There are no phase sequence tables, high frequency control lines, or complex interfaces to program. A4988 interface is very suitable for complex microprocessor is unavailable or is overburdened.
 
  In the micro-step operation, A4988 chopping control inside automatically selects the current decay mode (Slow or Mixed). In mixed decay mode, the device is initially set to a fixed downtime in some fast decay, then the rest of the slow decay downtime. Mixed decay current control scheme results in reduced audible motor noise, increased step accuracy, and reduced power consumption. Internal synchronous rectification control circuitry is provided to improve the pulse-width modulation (PWM) operation power consumption. Internal circuit protection includes: thermal shutdown with hysteresis, undervoltage lockout (UVLO), and crossover-current protection. Special power sequencing.
 
Feature:
Low RDS (ON) output
Automatic current decay mode detection / selection
Mixed with slow current decay modes
Synchronous rectification for low power dissipation
Internal UVLO
Crossover-current protection
3.3 and 5 V compatible logic supply
Thermal shutdown circuitry
Ground fault protection
Load short-circuit protection
Step five selectable modes: full, 1/2, 1/4, 1/8 and 1/16


Reprap Stepper Motor Driver Stepstick A4988 for 3D Printer Reprap Prusa MendelReprap Stepper Motor Driver Stepstick A4988 for 3D Printer Reprap Prusa Mendel