Pelanggan Yang Terhormat, seluruh aktivitas CENTRAL ELECTRONICS di pertokoan JAYA PLAZA dan di Head Office, Ruko Jl. Terusan Jakarta no. 30G Bandung sudah kembali seperti biasa.

Dear Customer, CENTRAL ELECTRONICS menyediakan layanan delivery order via kurir berikut:


IDR 395.000

 add to cart

Ultra-low-power with FlexPowerControl

1.71V to 3.6V power supply
-40C to 85/105/125C temperature range
300nA in VBAT mode: supply for RTC and 32x32-bit backup registers (4nA without RTC)
30nA Shutdown mode (5 wakeup pins)
120nA Standby mode (5 wakeup pins)
420nA Standby mode with RTC
1.1A Stop 2 mode, 1.4A Stop 2 with RTC
100A/MHz run mode
Batch acquisition mode (BAM)
4s wakeup from Stop 1 mode, 5s from Stop 2 mode
Brown out reset (BOR) in all modes except shutdown
Interconnect matrix

Core: ARM 32-bit Cortex-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator) allowing 0-wait-state execution from Flash memory, frequency up to 80MHz, MPU, 100DMIPS/1.25DMIPS/MHz (Dhrystone 2.1), and DSP instructions

Clock Sources

4 to 48MHz crystal oscillator
32kHz crystal oscillator for RTC (LSE)
Internal 16MHz factory-trimmed RC (1%)
Internal low-power 32 kHz RC (5%)
Internal multispeed 100 kHz to 48 MHz oscillator, auto-trimmed by LSE (better than 0.25 % accuracy)
3 PLLs for system clock, USB, audio, ADC

IoT and Handheld Measurement Uses

RTC with HW calendar, alarms and calibration
LCD 8 40 or 4 44 with step-up converter
16x timers: 2x 16-bit advanced motor-control, 2x 32-bit and 5x 16-bit general purpose, 2x 16-bit basic, 2x low-power 16-bit timers (available in Stop mode), 2x watchdogs, SysTick timer

Up to 24 capacitive sensing channels: support touchkey, linear and rotary touch sensors
Up to 114 fast I/Os, most 5 V-tolerant, up to 14 I/Os with independen